Methods to Add a Washing machine and Dryer Hookup

Adding a washer and clothes dryer to an house, condo or townhouse isn’t a straightforward home improvement task. It will take plumbing, air flow, electrical, and gas connections that can add up to five times the price tag on the devices themselves.

The first step is always to prepare the spot intended for the new laundry room. This requires measuring hallways, doorways, and stairways to ensure that the new automatic washer will fit and get connected to the power, water, and gas lines. It also helps you to remove exterior doors or complete furniture because needed.

If you plan to incorporate a washer in an condo or property, you will need to check the building’s alteration arrangement and house rules. Some complexes may forbid the installation of cleaners and washer dryer combos, but other folks will allow them with appropriate approvals and permits.

In any case, you need to check community building limitations and speak with a company or local plumber before you begin the washer and drier hookup method. You’ll likely need a permit, which often can run from $30 to $150 depending on the amount of involved.

Connecting Washing machine Hoses

Setting up a washer, it has the essential to use the correct hose for your particular style. This line typically screws into the washer store box which is attached to the spine of the equipment. In some cases, they have color coded with red meant for hot and blue for the purpose of cold water.

Drain Hoses

And so forth drain garden hose to hook up the washing machine and a drain faucet in a nearby laundry room. Many drain hoses happen to be u-shaped and add right to the washing machine release box. They’re available for many major brands of washers, and find them at most of the appliance stores.

Leave a Comment